Escape door systems

The two standards for emergency exit devices, DIN EN 179 – Emergency exit devices with handles - and DIN EN 1125 - Emergency exit devices with horizontal bars – were introduced from 01.04.2003 as European standards. They can be used as emergency exit devices and are regarded as equal to the familiar "panic locks". There is no statutory requirement in Germany to use these exclusively (see: Building Rules List A, edition 2011/1- Part 1, serial no 6.22/6.23).

The hardware used for an emergency exit system must be tested as a complete unit (lock, hardware and accessories) and sold with a CE mark. The processor is obliged to check the compatibility of the lock sets, hardware and accessories with the help of the certificates of conformity from the lock manufacturers.

Suitable lock sets with the matching hardware and accessories can be seen in the HUECK catalogues.

Locks and strike plates for emergency exit devices with handles
in accordance with DIN EN 179
EC Certificate of conformity WILKA 0432 -CPD -0021
Download (PDF file / 166 KB)

Optionally for panic exit devices with
horizontal operating bars or push bars
in accordance with DIN EN 1125
EC Certificate of conformity WILKA 0432 -CPD -0020
Download (PDF file / 167 KB)

Locks and strike plates for emergency exit devices with handles
in accordance with DIN EN 179
EC Certificate of conformity BKS 0432 -BPR -0003
Download (PDF file / 620 KB)

Optionally for panic exit devices with
horizontal operating bars or push bars
in accordance with DIN EN 1125
EC Certificate of conformity BKS 0432 -BPR -0002
Download (PDF file / 574 KB)

Error

You have reached the maximum number of documents. Send the download link to your address or delete any documents you no longer need.

Go to "MY DOCUMENTS"

If you wish to save more documents, you could login or register.